TM 1-2840-252-23-2
4-19
INSTALL FIRESHIELD SECTION (Continued)
4-19
Concave side of washer must face
fireshield section Failure to comply will
place wrong tension on internal oil tube
This may cause damage to oil tube.
Do not tighten reducer in following step
6. Tightening of reducer may damage
internal oil tube.
6. Remove reducer (10). Loosely install shim (12),
washer (13)concave side down, and reducer (10).
Adapter must be held firmly when
tightening reducer Failure to comply will
cause damage to internal tube assembly.
7. Hold adapter (11) with open-end wrench (T24) (9).
Torque reducer (10) to115 inch-pounds.
GO TO NEXT PAGE
4-79
