CLEAN AND INSPECT AIR SCREEN ASSEMBLY

CLEAN AND INSPECT AIR SCREEN ASSEMBLY (Continued)

TM-55-2835-208-23 Transportability Guidance Small Emplacement Excavator (SEE) High Mobility Entrencher (HME) High Mobility Material Handler (HMMH) Manual
Page Navigation
46

TM 55-2835-208-23 2-2 CLEAN AND INSPECT AIR SCREEN ASSEMBLY 2-2 INITIAL SETUP Materials: Applicable Configurations: Methyl-Ethyl-Ketone (MEK) (E9) Stiff Fiber Brush (E10) All Personnel Required: Tools: 68B Aircraft Powerplant Repairer Rubber Gloves 68B Powerplant Inspector NSN 8415-00-266-8677 Container Equipment Condition: Eye Protection Off APU Task MEK is flammable and toxic. It can irritate skin and cause burns. Use only in well-ventilated area, away from heat and open flame. Wear gloves and eye protection. In case of contact, immediately flush skin or eyes with water for at least 15 minutes. Get medical attention for eyes. Note Use a stiff fiber brush (E10) to remove deposits. 1. Wearing gloves and eye pro- tection, degrease air screen assembly(2) using MEK (E9). 2. Inspect for loose, missing, or cracked lacing hooks (l). There shall be no loose, cracked or missing lacing hooks (1). If loose, repair (Task 2-3). If missing or cracked, replace air screen assembly (2). GO TO NEXT PAGE 2-4

Privacy Statement
Press Release
Contact