TM 55-2840-254-23
9-12
CLEAN TORQUEMETER HEAD ASSEMBLY (Continued)
9-12
1.
Clean torquemeter head assembly (1). Wear
gloves (E20).
Use lint-free cloth (E26)
dampened in dry cleaning solvent (El7).
2.
Wipe dry. Use clean, dry lint-free cloth (E26).
WARNING
When using compressed air for
cleaning, use approved protective
equipment for eyes and face. Do not
use more than 30 psig air pressure.
Do not direct air toward yourself or
another person. Failure to comply
could result in injury to eyes or skin.
In case of injury, get medical
attention.
3.
Wear goggles. Blow dry electrical connector (2).
Use clean, dry, compressed air.
FOLLOW-ON MAINTENANCE:
Inspect Torquemeter Head Assembly (Task 9-
13).
END OF TASK
Change 6 9-45