92 CLEAN TORQUEMETER JUNCTION BOX
Off Engine Task
Compressed Air Source
Dry cleaning solvent (E17) is flammable
and toxic. It can irritate skin and cause
burns. Use only in wellventilated area,
away from heat and open flame. In case
Lint Free Cloth (E26)
of contact, immediately flush skin or
eyes with water for at least 15 minutes.
Get medical attention for eyes.
1. Clean torquemeter junction box (1) as fol-
END OF TASK
a. Wear gloves (E20) and clean junction box
(1). Use lintfree cloth (E26) dampened
with solvent (E49.1).
b. Use dry, lintfree cloth (E26) to remove sol-
When using compressed air for clean-
ing, use approved protective equipment
for eyes and face. Do not use more than
30 psig air pressure. Do not direct air
toward yourself or another person. Fail-
ure to comply could result in injury to
eyes or skin. In case of injury, get medi-
Wear goggles. Blow dry electrical connec-
tors (2) and inside surfaces (3). use clean,
dry compressed air.