8-105 CLEAN OIL LEVEL FLOAT ASSEMBLY (AVIM)
General Safety Instructions:
Dry cleaning solvent (E17) is flammable
and toxic. It can irritate skin and cause
burns. Use only in well-ventilated area,
away from heat and open flame. In case
Dry Cleaning Solvent (E17)
of contact, immediately flush skin or
eyes with water for at least 15 minutes.
Lint-Free Cloth (E26)
Get medical attention for eyes.
Off Engine Task
Output Shaft Engine Oil System Drained
Output Shaft Seal and Housing Assembly
Removed (Task 2-48)
Inlet Housing Cover Assembly Removed
Oil Level Float Assembly Removed
Oil Level Float Assembly Disassembled
1. Wear gloves (E20) and clean float (1). Use dry-
cleaning solvent (E17) and brush.
2. Wipe dry using lint-free cloth (E26).
GO TO NEXT PAGE