8-83 INSTALL NO. 4 AND 5 BEARING FILTER (Continued)
In following step, wear goggles when in-
stalling spring. Spring may fly apart
when installing. Failure to comply may
cause serious eye injury. If eye injury
occurs, get medical attention.
In following step, be sure that filter is
installed in reducer with small diameter
hole facing up. Failure to comply will
sult in bearing failure.
4. Wear goggles. Install No. 4 and 5 bearing filter
(7) and spring (8) in reducer (1).
In following step, hold No. 4 and 5 bear-
ing lube adapter using open-end wrench
(T53). Failure to use wrench may result
in damage and dislocation of oil trans-
fer tube resulting in oil leaks.
5. Place open-end wrench (T53) (6) on adapter (2).
6. Install hose assembly (9) on reducer (1).
GO TO NEXT PAGE