8-59 INSTALL HOSE ASSEMBLY (PRESSURE CONNECTOR TO NO. 4 AND 5 BEARING
In following step, hold No. 4 and 5
bearing lube adapter, using open-end
wrench (T53). Failure to use wrench
may result in damage and dislocation
of oil transfer tube resulting in oil
1. Install hose assembly (1) as follows:
a. Place open-end wrench (T53) (2) on No. 4
and 5 bearing lube adapter (3).
b. Connect hose assembly (1) to reducer (4).
c. Connect hose assembly (1) to tee and snubber
GO TO NEXT PAGE