TM 55-2840-254-23
8-57
8-57 lNSTALL TUBE ASSEMBLY(N0. 4 AND 5 BEARlNG SCAVENGE CONNECTOR
TO HOSE ASSEMBLY) (Continued)
In following step, hold No. 4 and 5
bearing and scavenge adapter using
open-and wrench (T53). Failure to
use wrench may result in damage and
mislocation of oil transfer tuba result-
ing in oil leads.
1. Install tube assembly (1) as follows:
a. Place open-end wrench (T53) (2) on No. 4
and 5 bearing scavenge adapter (3).
b. Connect tube assembly (1) to reducer (4).
c. Connect tube assembly (1) to hose assembly
(5).
GO TO NEXT PAGE
8-171