1-110 ADJUST OIL PUMP (Continued)
One full turn of adjustment screw (13)
will change the pressure approximately
b. Turn adjustment screw (13) clockwise to in-
crease pressure if oil pressure is lower than
c. Turn adjustment screw (13) counterclock-
wise to decrease pressure if oiI pressure is
higher than 130 psig.
d. Tighten locknut (12) and operate engine to
check oil pressure. If adjustment is still nec-
essary, repeat step 7a., 7b., and 7c.
e. Check oil pressure at No. 2 bearing connec-
tion pressure gage.
GO TO NEXT PAGE