1-93 INSPECT ENGINE HOT END (AVIM) (Continued)
d. Inspect forward support (141). There shalI be
e. Inspect 16 rivets (142). There shall not be
more than 40 percent missing material (143).
32. Inspect forward side of integral shaft assembly
(144) as follows:
a. Use flashlight and look between third stage
turbine nozzle vanes. Inspect 64 blades (145).
(1) There shall be no cracks.
(2) There shall be no burns.
(3) There shall be no bending or distor-
(4) There shall be no loss of material.
(5) There shall be no pitting.
GO TO NEXT PAGE