TM 55-2840-254-23
1-93 INSPECT ENGINE HOT END (AVIM) (Continued)
1-93
9. If inspection criteria in steps 3. thru 8. are not
met, remove, clean, inspect, repair or replace
defective parts. Refer to following tasks as
needed:
a. Remove, clean, inspect, repair, and install
second turbine nozzle, spacer, and case
(Ref. Tasks 4-57, 4-58, 4-59, 4-60 and 4-61).
b. Remove, clean, inspect, repair, and install
first turbine disc assembly (Ref. Tasks 4-62,
4-63, 4-64, 4-65 and 4-66).
c. Remove, clean, inspect, and install first tur-
bine nozzle (Ref. Tasks 4-67, 4-68, 4-69, and
4-71).
d. Remove, clean, inspect, repair, and install
diffuser curl (Ref. Tasks 4-73, 4-74, 4-75,
4-76, and 4-77).
GO TO NEXT PAGE
1-328