TM 55-2835-209-23
3-12 REPLACE COMBUSTOR CASE RIVETS (AVIM) (CONT)
REMOVAL
Exercise care when drilling
out old rivet not to damage
basic items.
Drill or machine off head of installed
rivet (1).
Use a center punch and ham-
mer to punch out remainder of rivet.
INSTALLATION
1.
Clean mating surfaces using 1,1,1-
trichloroethane (D41).
2.
Using acid brush (D5). apply a wet
coat of epoxy Primer (D30) to grip
area of rivet and bore area.
Air
dry a minimum of 3 minutes.
3.
Position nut plate (2) on bracket
(3) and secure in place using riv-
ets.
4.
Cover each end of rivets with epoxy
primer (D30).
FOLLOW-ON MAINTENANCE: None.
3-26