TM 55-2835-209-23
7-5 REPLACE INSERT (AVIM) (CONT)
REMOVAL
1.
Place gearbox housing on work sur-
face.
2.
Drill insert (1) to allow
extraction.
3.
Collapse and
INSTALLATION
remove insert (1).
NOTE
Prior to assembly, all compo-
1.
2.
3.
4.
5.
6.
nents will be visually in-
spected for damage.
Clean insert and area with
1,1,1-trichloroethane (D41) and ma-
chinery towel (D20).
Apply epoxy primer (D30) with cotton
applicator (D10). Allow to cure 1
to 5 minutes.
Install insert one turn below sur-
face of the countersink.
Remove insert (1) tang.
Remove excess epoxy primer (D30)
with machinery towel (D20) and dry
cleaning solvent (D35).
Air dry for 72 hours at 62 to 92°F
(17 to 33°C).
FOLLOW-ON MAINTENANCE: None.
7-12
Change 1