TM 55-2835-209-23
5-3 REPLACE MOTIONAL PICKUP TRANSDUCER (CONT)
NOTE
Each lamination is 0.002 inch
thick.
7.
Peel lamination
to achieve requi
step 4.c or 5.c.
pieces from shim (1)
red thickness of
INSTALLATION
NOTE
As tubes and connectors are
installed and connected, pro-
tective caps and plugs shall
be removed.
Prior to assembly, all compo-
nents will be visually in-
spected for damage.
1.
Install shim (1) on motional pickup
transducer (3).
Lubricate packing
(2) with lubricating oil (D16). In-
stall on motional pickup transducer.
2. Apply antiseize compound (D8) to
bolt (5).
3.
Install motional pickup transducer
(3) in gearbox assembly.
4.
Secure transducer (3) with washer
(4) and bolt (5).
Torque bolt to 33
to 37 inch-pounds.
5. Connect electrical connector (6) and
lockwire with lockwire (D43).
FOLLOW-ON MAINTENANCE: None.
5-9