MARINE CORPS TM 6115-24P/1
EXPLANATION OF COLUMNS. (cont)
(ALL) Unit of Measure
Indicates the standard of the
basic quantity of the listed item as used in performing the actual maintenance
This measure is expressed by a two-character alphabetical abbreviation
(e.g., ea, in, pr, etc.,).
When the unit of measure differs from the unit of
the lowest unit of issue that will satisfy the required units of measure
will be requisitioned.
Quantity Incorporated in Unit (Column 7).
Indicates the quantity
of the item used in the assembly group.
A V appearing in this column in lieu of
a quantity indicates that a definite quantity cannot be indicated (e.g., shims,
Indicates the consolidated
quantity of a maintenance part used on an end item upon the parts first
appearance in this publication.
SPECIAL INFORMATION .
(ALL) Identification of usable on codes used in this publication are:
(There are no usable on codes applicable to this equipment/publication.)
Army organizational maintenance personnel will extract the items which
they require from Section II, 3rd or 4th position of column 2 of the direct and
general support RPSTL.
Parts which are manufactured or assembled at a higher
level than that authorized to install the part are indicated by the use of a
higher level code in the source column.
(1) Air Force stockage information is contained in Initial Supply Support
Lists issued separately from this publication by Sacramento Air Logistics Center
in accordance with AFM 67-1, part 1, chapter 12.
(2) Navy stockage objectives are contained in the Coordinated Shipboard
Allowance List as furnished separately from this publication by the Ship Parts
(3) Marine Corps stockage information is contained in columns 3a and 3b of
the tabular listing of this publication.
(4) Army stockage is demand based in accordance with AR 710-2.
parts listed in this publication represent those authorized for use at indicated
maintenance levels and will be requisitioned on
an as-required basis until
stockage is justified in accordance with AR 710-2.