REPAIR TORQUEMETER SENS OR
Crocus Cloth (E16)
Aircraft Powerplant Repairer
Technical Inspection Tool Kit,
Off Engine Task
Dry, Compressed Air Source
This repair is allowed provided it does not cause pins to break or crack.
1. Straighten bent pins (1) of electrical connector (2). Using long-nose pliers, gently move pins (1) until they are straight.
2. Remove corrosion from pin (1) of electrical connector (2). Polish pins using in and out motion over entire length of
pin until corrosion is removed. Use crocus cloth (E16).
When using compressed air for cleaning, use approved protective equipment for eyes and face. Do not
use more than 30 psig air pressure. Do not direct air toward yourself or another person. Failure to
comply could result in injury to eyes or skin. In case of injury, get medical attention.
3. Wear goggles. Remove loosened particles from connector (2), using clean, dry, compressed air.
END OF TASK