INSTALL HOSE ASSEMBLY (PRESSURE CONNECTOR TO NO. 4 AND
5 BEARING FILTER)
In following step, hold No. 4 and 5 bearing lube adapter, using open-end wrench (T24).
Failure to use wrench may result in damage and mislocation of oil transfer tube resulting
in oil leaks.
Install hose assembly (1) as follows:
Place open-end wrench (T24) (2) on No. 4 and 5 bearing lube adapter (3).
Connect hose assembly (1) to reducer (4).
Connect hose assembly (1) to tee and snubber (5).
GO TO NEXT PAGE