INSTALL TUBE ASSEMBLY (NO. 4 AND 5 BEARING SCAVENGE
CONNECTOR TO TUBE ASSEMBLY)
In following step, hold No. 4 and 5 bearing and scavenge adapter using open-end wrench (T24). Failure
to use wrench may result in damage and mislocation of oil transfer tube resulting in oil leaks.
1. Install tube assembly (1) as follows:
a. Place open-end wrench (T24) (2) on No. 4 and 5 bearing scavenge adapter (3).
b. Connect tube assembly (1) to reducer (4).
c. Connect tube assembly (1) to tube assembly (5).
GO TO NEXT PAGE