TM 1-2840-252-23-3
8.3
CLEAN MAIN OIL PUMP, SPEED PICKUP DRIVE ASSEMBLY,
8.3
SCAVENGE OIL SCREEN, AND RELATED PARTS
INITIAL SETUP
Main Oil Pump, Speed Pickup Drive Assembly.
Applicable Configurations:
Scavenge Oil Screen, and Related Parts Removed
(Task 8-1)
All
Main Oil Pump, Speed Pickup Drive Assembly,
Tools:
Scavenge Oil Screen, and Related Parts Disas-
sembled (Task 8-2)
General Safety Instructions:
Goggles
Dry, Compressed Air Source
WARNING
Materials:
Dry cleaning solvent (E19) is flammable
Dry Cleaning Solvent (E19)
and toxic. It can irritate skin and cause
Gloves (E24)
burns. Use only in well-ventilated area,
Lint-Free Cloth (E30)
away from heat and open flame. In case
Personnel Required:
of contact, immediately flush skin or
eyes with water for at least 15 minutes.
Equipment Condition:
Get medical attention for eyes.
Off Engine Task
1. Wear gloves (E24). Clean oil pump (1) using dry cleaning solvent (E19) and brush.
2. Clean exterior of pickup drive assembly (2), and cover (3). Use dry cleaning solvent (E19) and brush.
3. Remove any remaining solvent using clean, dry, lint-free cloth (E30).
GO TO NEXT PAGE
8.14