CLEAN IGNITION COIL AND CABLE ASSEMBLY
Off Engine Task
General Safety Instructions:
Dry cleaning solvent (E19) is flammable
Dry, Compressed Air Source
and toxic. It can irritate skin and cause
burns. Use only in well-ventilated area,
Dry Cleaning Solvent (El9)
away from heat and open flame. In case
of contact, immediately flush skin or eyes
Lint-Free Cloth (E30)
with water for at least 15 minutes. Get
medical attention for eyes.
1. Wear gloves (E24). Clean ignition coil and cable assembly (1) with lint-free cloth (E30) and brush dampened in
dry cleaning solvent (E19).
GO TO NEXT PAGE