Technical Inspection Tool Kit,
Off Engine Task
1. Inspect hydromechanical assembly housing (1).
There shall be no cracks. There shall be no evidence
a. Inspect inlet and outlet openings for damaged
b. Inspect splines (2) (Ref Task 1-109). There shall be
no wear deeper than 0.007 inch on splines (2).
c. Inspect electrical connectors (3, 4, and 5) for bent
pins and/or corrosion.
d. Inspect seal (6) for damage. Seal shall not be
missing, cut, or deformed.
GO TO NEXT PAGE