4-76 INSTALL TAILPIPE ASSEMBLY
Do not let tailpipe assembly contact engine
blades. Damage to blades can result.
The following steps 1 thru 3 require the aid of
another repairer to support the tailpipe assembly.
Bolt holes on tailpipe assembly must be aligned
with bolt holes on engine.
Position tailpipe assembly (1) on engine (2) so that
matchmark (3) aligns with matchmark on engine at
12-o'clock position. Install tailpipe assembly.
In following step 2 position center of latch at 3-
o'clock or 9 o'clock position. The 3-o'clock
position is shown.
Install retainer coupling (4). Engage latch (5) and
tighten nut (6) Torque to 50 inch-pounds.
Tap all around retainer coupling (4), using rubber
mallet, to seat properly. Retorque nut (6) to 50 inch-
Lockwire latch (5). Use lockwire (E32).
GO TO NEXT PAGE