INSTALL FOURTH STAGE POWER TURBINE NOZZLE (AVIM) (Continued)
Install faceplate (22),beveled side down, on No 5
Install seal (20).
Lubricating oils cause paralysis if swallowed.
Prolonged contact with them may irritate the
skin. Handle only in well-ventilated areas away
from heat and flame. Drain and store in
approved metal safety containers. Avoid
prolonged or repeated contact with skin and do
not take internally. Wash contacted area of
skin thoroughly after handling. If irritation of
skin results, get medical attention. Get medical
attention for eyes.
Be sure to apply a light coat of lubricating oil
on faceplate before installation. Failure to
comply will cause damage to aft seal during
dry running of initial engine starts.
Wear gloves (E23). Apply light coat of lubricating oil
(E35 or E36) on faceplate (22). Align bolt holes (30)
with bolt holes (31) and install aft seal and retainer
(19) and three screws (18).
GO TO NEXT PAGE