INSTALL NO. 4 AND 5 BEARING PACKAGE SEALS (AVIM) (Continued)
Care shall be taken when handling and installing seal. Carbon elements in seal could easily
break. This will cause oil leakage and damage to engine.
c. Install seal (5)carefully on adapter (6) of seal removal tool (T20) with flat side (7) facing up
d. Install adapter (6) and seal (5) through forward seal retainer (2) and into base (3)
e. Press seal (5) into forward seal retainer (2) until seal face (8) touches shoulder (9) Use arbor press
t. Remove adapter (6) and base (3)
GO TO NEXT PAGE