INSTALL THIRD TURBINE NOZZLE AND SUPPORT (AVIM) (Continued)
Seal rings shall be installed with chamfered edge up.
2. Install end of seal ring (4) in groove (2) over expander
spring (1) Keep feeding seal ring (4) into groove (2)
until entire seal ring is seated.
3. Locate 12-o'clock position on third turbine nozzle
and support(5). Small indentation (6) on aft flange of
nozzle (7) is at 1 2-o'clock position Mark line (8) on
outside of support (3) Use marking pencil (E38).
GO TO NEXT PAGE