4-24 TEST THERMOCOUPLE HARNESS ASSEMBLIES (AVIM)
Acetate Fiber Tape (E60)
This task may be done with the five thermocouple
harness assemblies on or off the engine If testing is
being done with assemblies on engine, do all steps.
If testing is being done with assemblies off engine,
do steps 3 and 4 only.
1. Loosen five screws (1) and remove five thermocouple
harness pins (2).
2. Loosen five screws (3) and remove five thermocouple
harness pins (4).
GO TO NEXT PAGE