TM 1-2840-252-23-2
2-42
REPAIR OUTPUT SHAFT SEAL AND HOUSING ASSEMBLY (Continued)
2-42
g. Install oil seal as follows
(1) Position housing (5) on ring (11) of installation
tool (T5) with aft side (12) seated into recessed
I.D. (13).
(2) Position oil seal (4) on housing (5) with face
marked OIL SIDE (14) facing down.
(3) Position sleeve (15) of installation tool (T5) on
oil seal (4) with recessed I.D. (16) facing down.
GO TO NEXT PAGE
2-334